How to Adjust Old Cabinet Door Hinges

How to Adjust Old Cabinet Door Hinges

When you are looking to give your cabinets a fresh new look, one easy way to do this is by adjusting the hinges. This can make your cabinets look like they were just installed yesterday.

In this blog post, we will show you how to adjust old cabinet door hinges in a few simple steps. With just a little bit of effort, you can have beautiful new looking cabinets in no time!

Tools Needed for Adjusting Cabinet Hinges

  • A Phillips head screwdriver
  • A drill (optional)
  • A hammer (optional)
  • Cabinet hinges (if replacing)

Identify the Cabinet Door Hinge Type

The first step is to identify the type of hinge that is on your cabinets. There are three main types of cabinet door hinges:

  1. Concealed Hinges – These hinges are not visible when the door is closed and can give your cabinets a sleek and modern look.
  2. Surface Mounted Hinges – These hinges are mounted on the surface of the cabinet door and are visible when the door is closed.
  3. Full Mortise Hinges – These hinges are recessed into the door and require special installation.

Once you have identified the type of hinge, you can proceed to the next step.

Measure the Hinge Gap

The next step is to measure the gap between the door and frame. This is important because you will need to adjust the hinges so that the door closes properly. To do this, simply use a tape measure to determine the width of the gap.

If the gap is too large, the door will not close properly. If the gap is too small, the door will rub against the frame and cause damage. The ideal hinge gap is between 1/8″ and 3/16″.

Loosen the Screws

Once you have identified the type of hinge and measured the hinge gap, it is time to loosen the screws. To do this, simply use a screwdriver to loosen each of the screws that hold the hinge in place.

Do not remove the screws completely, just loosen them enough so that they can be adjusted.

Adjust the Hinge Multiple solutions

Cabinet Doors Rubbing Against Each Other

If your cabinet doors are rubbing against each other, you will need to adjust the hinges so that they are not touching. To do this, simply loosen the screws and then tap the hinge in or out until there is a small gap between the doors.

Cabinet Doors Not Closing Properly

If your cabinet doors are not closing properly, you will need to adjust the hinges so that they are closer together. To do this, simply loosen the screws and then tap the hinge in or out until the door closes properly.

You may need to experiment with this a bit to get it just right.

Tighten the Screws

Once you have adjusted the hinges to your liking, it is time to tighten the screws. To do this, simply use a screwdriver to tighten each of the screws.

Make sure that the screws are tight enough so that the hinge does not move, but not so tight that the hinge is difficult to adjust in the future.

And that’s it! By following these simple steps, you can easily adjust old cabinet door hinges and give your cabinets a fresh new look.

Cabinet Door Hinges Too Stiff

If your cabinet door hinges are too stiff, you may need to lubricate them. To do this, simply use a small amount of WD-40 or similar lubricant on the hinge.

Then, open and close the door a few times to work the lubricant into the hinge. This will make it easier to adjust the hinge in the future.

Cabinet Door Hinges Loose

If your cabinet door hinges are loose, you will need to tighten the screws. To do this, simply use a screwdriver to tighten each of the screws.

Make sure that the screws are tight enough so that the hinge does not move, but not so tight that the hinge is difficult to adjust in the future.

Cabinet Doors Too Noisy

If your cabinet doors are too noisy, you may need to adjust the hinges so that they are not touching. To do this, simply loosen the screws and then tap the hinge in or out until there is a small gap between the doors.

Cabinet Doors Are Overlapping

If your cabinet doors are overlapping, you will need to adjust the hinges so that they are further apart. To do this, simply loosen the screws and then tap the hinge in or out until there is a small gap between the doors.

Cabinet Doors Not Level

If your cabinet doors are not level, you will need to adjust the hinges so that they are flush with the surface of the door. To do this, simply loosen the screws and then tap the hinge up or down until it is level with the surface of the door.

As you can see, there are multiple solutions to common cabinet door hinge problems. By following these simple steps, you can easily adjust old cabinet door hinges and give your cabinets a fresh new look.

Also Read About: Pros and Cons of Pocket Doors 

FAQS

How do you fix old cabinet hinges?

There are multiple solutions to common cabinet door hinge problems. By following these simple steps, you can easily adjust old cabinet door hinges and give your cabinets a fresh new look.

How to fix old cabinet doors that won’t close?

If your cabinet doors are not closing properly, you will need to adjust the hinges so that they are closer together. To do this, simply loosen the screws and then tap the hinge in or out until the door closes properly. You may need to experiment with this a bit to get it just right.

How do you adjust 2 screw hinges?

To adjust a 2 screw hinge, simply loosen the screws and then tap the hinge in or out until it is level with the surface of the door. You may need to experiment with this a bit to get it just right.

How do you adjust old cabinet hinges that won’t close?

If your cabinet doors are not closing properly, you will need to adjust the hinges so that they are closer together. To do this, simply loosen the screws and then tap the hinge in or out until the door closes properly. You may need to experiment with this a bit to get it just right.

Final Words

Have you tried adjusting your cabinet door hinges before? It’s a quick and easy process that can make a big difference in the overall look and feel of your cabinets. If you need help, our team is here to walk you through the steps. We would love to hear about your experience adjusting cabinet door hinges in the comment section below. Thanks for reading!

Similar Posts

Leave a Reply